| | | - material width max.: 60 - 500 mm
- material thickness max.: 0,5 - 1,5 mm
- pressure force: 12 kN
- Strokes without material: max. 180 - 370 1/min.
- Strokes with material: depending on thickness and yield strength
- stroke height: 5 - 20 mm
- with adjustable blade clearance for a most precise cut at any thickness: serie
- spring-actuated hold down clamp: optional (from 250 mm stock width)
- top/bottom dead center control to monitor blade position: optional
- counter control: optional
- mounting bracket: optional
- filter-regulator-lubricator: optional
| |
|
