| | | - material width max.: 160 - 320 mm
- material thickness max. at 2,5° cutting angle: 5,0 mm
- material thickness max. at 3,5° cutting angle: 5,9 N/mm˛
- Data for max thicknesses are based on a yield strength of: 400 N/mm˛
- pressure force at 250 bar: 140 kN
- Strokes without material: max approx. 80, depending power unit
- Strokes with material: depending on thickness and yield strength
- stroke height: 22 - 29 mm
- blade clearance: series
- spring-actuated hold down clamp: optional (from 250 mm stock width)
- top/bottom dead center control to monitor blade position: optional
- counter control: optional
- mounting bracket: optional
- hydraulic power units in different sizes: optional
- electrical control : optional
- mounting angle: optional
- maintenance unit: optional
| |
|
